Air Core Reactors
Current limiting reactors are used in reactive power compensation as well as to protect older equipment from higher fault currents as the power grid grows. PEC designs and manufactures current limiting reactors for both utility and industrial systems up to 200 KV.
KEY FEATURES
Single and three phase designs
Indoor or outdoor installation
System voltage from 480 V to 200 kV
Continuous current from 30 A to 4000 A
Aluminum or Copper wire coils
Single or multi-tap inductance
Designed to industry standards such as IEEE C57.16
Available Options
Reactor stands
Corona rings
Protective enclosures
Custom bus work
Transient limiting reactors limit momentary inrush and outrush current spikes when shunt connected capacitors are turned on. PEC designs and manufactures transient limiting reactors for capacitor applications up to 550 kV.
KEY FEATURES
Single and three phase designs
Indoor or outdoor installation
System voltage from 500 V to 550 kV
Continuous current from 30 A to 4000 A
Aluminum or Copper wire coils
Single or multi-tap inductance
Designed to industry standards such as IEEE C57.16
Available Options
Reactor stands
Corona rings
Protective enclosures
Custom bus work
Neutral grounding reactors are connected to the neutral winding of transformers to provide high impedance between line and ground in the event of a fault. PEC designs and manufactures neutral grounding reactors up to 34.5 KV and short circuit currents up to 40 KA.
KEY FEATURES
Single phase designs
Outdoor installation
System voltage from 480 V to 34.5 kV
Continuous current from 10 A to 1000 A
Aluminum or Copper wire coils
Designed to industry standards such asIEEE C57.16
Available Options
Reactor stands
Corona rings
Protective enclosures
Custom bus work
Shunt reactors are used to compensate for the capacitive reactive power generated by lightly loaded transmission lines.
KEY FEATURES
Single and three phase designs
Indoor or outdoor installation
System voltage from 500 V to 15 kV
Continuous current from 30 A to 4000 A
Aluminum or Copper wire coils
Single or multi-tap inductance
Designed to industry standards such as IEEE C57.16
Available Options
Reactor stands
Corona rings
Protective enclosures
Custom bus work
Ready to Discuss Your Project?